Ortur Laser Master II 3D Printable Cable Management!

Ortur Laser Master II 3D Printable Cable Management System!

We added a ORTUR Laser Master 2 32-bit Motherboard Laser Engraving Machine 400 x 430mm Large Engraving Area Fast Speed High Precision Laser Engraver (see more here: diy3dtech.com/ORTUR_Laser_Master ) to our collection of tools however quickly noticed that cable like on most Chinese imports was a lacking so to Fusion 360 we turned to solve the problem! Here is how it all works (also see pictures):

Ortur Laser Cable Holder_x3.stl You will need to print three (3) of these and for the X-Axis you will use an existing hole in the mounting plate (again see photo). For the Y-Axis you will need to drill two 3mm holes and you will require 3mm bolts (see more here: amzn.to/3fBpuQ6 ). This part does have modeled threads on one side so the direction is important (as the other side is a pass though hole). Worth note I did for the Y-Axis also 3mm nuts because of the extra stress however this is up to you. Also, while the cable wrap does snap into the sleeve, we recommend small zip-ties as you see in the pictures. Too, for the most part the X-Aixs which is the most problematic is held out of the way, however you could also add piece of solid picture hanging to stiffen it more and hold it vertical.

Ortur Laser Cable Holder Laser Head.stl Requires only and attaches to the laser head with the two existing bolts and receives the cable race from the gantry. Again use a zip-tie to restrain the cable.

Download Model: designstore.diy3dtech.com/wp-content/uploads/2020/11/Ortur_Laser_Master_Cable_Management_v1.zip

Print Settings

Printer brand: Any
Printer: Any
Rafts: No
Supports: No
Resolution: 0.2 or 0.3mm
Infill: 20%
Filament color: Black (or you pick)
Filament material: diy3dtech.com/pla

High Quality and Affordable 3D Printing!


Affordable and High Quality Tools!